For each passport cover you’ll need to cut the following:

2- 12 1/2″ x 6″ pieces of fabric (I used micro-suede.  It’s easily cleanable and not too bulky!  A cotton would work well too.)

1-12 1/2″ x 6″ piece of lightweight interfacing (non-fusible)

Sew-In Colorfast InkJet Fabric Sheets for your printer (You can find these in the sewing section of any craft/hobby store.)

Coordinating thread

Your choice of which download you’ll be using for the front and back!

I’ve got the artwork download available in 2 different patterns with a total of 4 different colorways.  Hopefully there’s something for everyone!  One design has artwork with “Hello” in different languages on the front and an airplane design on the back.  The other design has an airplane pattern on the front with the text “Are we there yet?” and the text “How about now?” on the back.  (Click on the image below to download the PDF.)

First you’ll want to do a test print on a normal piece of computer paper.

This is just to make sure you’ve got everything right before you print something wrong on the fabric sheets.  I loved how these printed so nicely!  You can hardly notice a difference between the fabric and paper printout!

After they print, you’ll need to follow the instructions on the package to heat set the image.  It was a really simple process that took no longer than 5 minutes.  It involved heat setting the image, rinsing the image, patting dry the image, and re-ironing to dry and heat set the image.  Below you can see one dry fabric sheet (on the left) and one wet fabric sheet (on the right).

It warns you to pat dry, and not to rub so I thought I’d give it a rub just to see what happens.  Turns out it’s very easy to rub and blur the image when it’s being rinsed the first time.  See where I rubbed the word Schlosser?  It definitely got blurry quickly!  (It’s permanent and won’t blur after the final dry and heat set,  don’t worry!)

You’ll trim the front and back along the crop lines on the printout.  Layout the front and back printout pieces according to the measurements below on your front main fabric piece:

(To find the middle, just fold the larger piece in half and crease with your finger.)

Stitch 1/8″ around the edge of the pieces.

Layer the two fabric pieces right sides together with the interfacing on top.  Stitch 1/4″ around the pieces, leaving a 2-3″ opening along the short side.  Clip the corners and turn right side out.  Iron the opening and top stitch along both short sides.  (Sorry, I forgot to take a picture of this step!)  Fold ends in 2 1/2″, pin, and top stitch 1/8″ along the long sides to sew the pockets down.

Add your passport and you’re ready for some stylish travel!!

{Front}

{Back}

The colorways I made go with lots of different fabric colors so you can mix and match to your hearts content!  (They’ll also make great card fronts.)

Enjoy!

Erin

P.S. If you make one I’d love to see it!  Don’t forget to upload it to the Schlosser Designs Group on Flickr!

Download the PDF here.  It includes the Strawberry boxes in a light and dark pink, 2 different cards, and the blank template if you want to use your own patterned paper to make the boxes!  (Have a Cricut and the SCAL software?  You can download the box template here and the leaf template here to let the Cricut cut it out for you!)

Instructions:

Print the entire PDF out onto white cardstock.  There are 2 cards on the page, cut in half so you’ve got two pieces that are 8 1/2″ x 5 1/2″.

Score at 4 1/4″, and fold.  Your cards are done!

To fold the box see the video below.  (It was going to be a little tricky to show you in pictures so I made a quick video instead!)

See, it is pretty easy!

If you are using your Cricut and SCAL, or the blank template to use your own patterned paper, just cut the base out of a strawberry colored paper, and the leaves out of a leaf colored paper.

Layer and glue the leaves onto the base.

Fold according to the instructions in the video above.

Let me know if you enjoyed this and Happy Crafting!

Erin

P.S.  Have you registered for CraftyCon yet?  It’s going to be awesome!  There’s even a special code right now for an additional $50 off of registration!

Be sure to check out the speakers too!  There’s lots of great crafty business minded people and we’re adding more almost daily!  Hope to see you there!

What you’ll need:
A few sheets of patterned paper (Trimmed to 7 3/4″ x 3 1/2″)
Orange Cardstock (Trimmed to 2 3/4″ x 1 3/4″)
Light Ivory Cardstock (You’ll print on this so make sure it’s trimmed down to 8 1/2″ x 11″ to fit into your printer!)
Coordinating Ribbon

Score along the lines of your patterned paper as shown below:

Fold along the lines and adhere the flap to make your triangle shaped place cards.

Type into the free PDF (available here) what you’d like the place cards to say.  You could also use these for labels for all the different Thanksgiving dishes!  (If the font isn’t one you have on your computer-Download the free font here, follow the directions on adding it to your font library, and reopen the PDF.  You’ll be able to use the same font as I did in the example!)  Print and trim the pieces on the dotted lines and mount on your pieces of orange cardstock.  Tie a simple ribbon bow to the left side and mount on one side of your place card with foam tape.  You’re done!

To make the napkin rings, just cut a few strips of paper and hold them while setting the eyelets!  (I used my Crop-A-Dile to make it easier!)

Now you’re well on your way to a beautiful Thanksgiving!

P.S. Here’s a funny little conversation my husband and I had.  I was leaving to go to teach a card class and my husband was helping me get everything loaded in the car and was making sure I had everything I needed.  (Isn’t he sweet!)  The conversation went something like this:

Christian:  Do you have your adhesive?

Me: Yep!

Christian: What about all your stamps?

Me: Yep!

Christian: What about all your paper?

Me: Yep!

Christian: What about all your animals?  Do you need those for this class?

Me: Huh? Animals?

Christian:  You know, your Cricut (cricket), Crop-A-Dile (crocodile), Cuttlebug (bug)…

I just started laughing…  

Have a great weekend Everyone!

This free template has two options for you!

Here are the main items assembled to put together the kit. The free PDF template (see below for the download link), silver tin, a few coordinating papers, and don’t forget the chocolate Riesens! Just cut out the pieces you’d like to use and you’re ready to go!

This is my favorite part! If you use the pocket and handkerchief pieces don’t forget to write a little note on the handkerchief to put in the pocket!

Wrap the Riesens in strips of paper for a fun treat inside!

Download the template and instructions by clicking here. Enjoy!

Happy Crafting!

Download the PDF here. There are two cards on the sheet. Just print on 1 sheet of white cardstock, cut in half, embellish, and you’re done!

But wait, you might ask why I had some testers test this project out first. It’s because the sentiment on the front of the card can be whatever YOU want it to be! (Look for more projects with this feature shortly!) When the PDF opens up, click on the sentiment where it says Type Custom Sentiment Here and type away to your hearts content. These cards will allow you two lines in which to type a custom sentiment for your mom! How awesome is that?

Happy Tuesday Everyone!

Edited: Thanks Daniel for letting me know about the bandwidth! It is a pretty popular download. The location has now been moved and is ready for downloading again. I’m working on moving the rest of my projects over so as soon as they are moved I’ll let everyone know. Thanks for your understanding!

When I made it I put one prompt on each page (each prompt is the size of an index card) and left space on the other side for a picture. That way the book is already made, the new parents just fill in their thoughts and add a picture!

Let me know in the comments if there are other pages you’d like to see and I can make those a separate download!

Happy Crafting!

Tomorrow I’ll have the bag topper and candy wrapper labels for your downloading pleasure!

Edited:
Ok, download the two PDF’s and you’re good to go! I wrapped the labels around Hershey’s Nuggets so all you’ll need is a bag of those and you’re ready! The instructions for the bag toppers are in the download and I just added a simple silver rhinestone for something extra.

Here’s the links! Click to download the PDF’s.
Candy Cover Labels
Candy Bag Toppers

**Be sure that when you print them they are not scaled or fitting to page. This will cause them to not print correctly! For the labels I used the Avery 8860 white address labels. (They are 1″ x 2 5/8″)

Let me know if you’ve got any questions or comments!

Happy Crafting!

Here’s what the sheet looks like printed out:

All you will need is white cardstock, paper trimmer, and a either an x-acto knife or sharp pointed scissors. The sheet will print out with some very fine, light grey lines on it. Just cut along those lines, trim the scalloped shaped area out and fold both pieces in half. You’ve got two cards and the only scrap is a little rectangle of cardstock!

This is probably my favorite! I had it designed to say Just Because but my husband was watching and suggested that I put underneath that: friendship doesn’t need a reason. How clever is he? So there you have it, a collaborative project!

Click on the pictures below and they will take you straight to the PDF to print out. Be sure when you print them out you Don’t scale to fit the page. Just print it exactly like it is. This will make sure that the sizes and placement come out correctly!

Happy Crafting!

Download the PDF by clicking on the preview image below. For added effect, cut out around the shaped ones to make a slightly scalloped edge!

Happy Crafting!